Submissions from 2015
A Simple Analytical Model of Laser Bending Process, A. Eideh, Uday Dixit, and Raghu Echempati
Injury Sources for Second Row Occupants in Frontal Crashes Considering Age and Restraint Condition Influence, Anand Sai Gudlur and Theresa Atkinson
Natural Frequencies of Layered Beams Using a Continuous Variation Model, Arnaldo J. Mazzei Jr. and Richard A. Scott
Airflow Optimization in Retail Cabinets and the Use of CFD Modelling to Design Cabinets, Homayun K. Navaz, Mazyar Amin, Ramin Faramarzi, Nasser Kehtarnavaz, Kristina Kamensky, and Albert Nowakowski
A General-Purpose Multiphase/Multispecies Model to Predict the Spread, Percutaneous Hazard, and Contact Dynamics for Nonporous and Porous Substrates and Membranes, Homayun K. Navaz, Ali R. Zand, Amir Gat, and Theresa S. Atkinson
Relationship between coupling and the controllability Grammian in co-design problems, Diane L. Peters, Panos Y. Papalambros, and A. Galip Ulsoy
Effects of Pretensioners and Load Limiters on 50th Male and 5th Female Seated in Rear Seat during a Frontal Collision, Massoud Tavakoli and Janet Brelin-Fornari
Submissions from 2014
A Method to Modify Angle-Stable Intramedullary Nail Construct Compliance, Patrick Atkinson, B. P. Flanagan, D. LeCronier, M. R. Kubacki, and P. Telehowski
Biomechanical Performance of Variable and Fixed Angle Locked Volar Plates for the Dorsally Comminuted Distal Radius, Patrick Atkinson, D. Martineau, J. Shorez, C. Beran, and A. G. Dass
Fate of a Sessile Droplet Absorbed into a Porous Surface Experiencing Chemical Degradataion, Theresa Atkinson, Homayun K. Navaz, Albert Nowakowski, Krissy Kamensky, Ali Zand, and Janice Jackson
Pulse Sensitivity of a Child Restraint System, Near-Side Impact Fixture, Janet Brelin-Fornari and Sheryl Janca
Long-Term SOFCs Button Cell Testing, Gianfranco DiGiuseppe and Li Sun
Treatment of Fibromyalgia with Neurostimulation: a Randomized, Double-Blinded, Sham-Controlled Trial, Jeffrey Hargrove, R. Michael Gendreau, Donald Deering, and Judith Gendreau
Side Impact Testing of the Near-Side, Rear Seat Occupant Using a Deceleration Sled, Sheryl Janca, Kurt Shanks, Janet Brelin-Fornari, Ravi Tangirala, and Massoud Tavakoli
Vibrations of Discretely Layered Structures Using a Continuous Variation Model, Arnaldo J. Mazzei Jr. and Richard A. Scott
Contact Dynamic Modelling of a Liquid Droplet between Two Approaching Porous Materials, Homayun K. Navaz, Ali Zand, Theresa Atkinson, Albert Nowakowski, Amir Gat, and Sari Paikoff
Submissions from 2013
Angle Stable Nails Provide Improved Healing for a Complex Fracture Model in the Femur, Patrick Atkinson, Meghan R. Kubacki, Christopher A. Verioti, Savan D. Patel, Adam N. Garlock, and David Fernandez
Computational Fluid Dynamics Modeling of a Catalytic Flat Plate Fuel Reformer for On-Board Hydrogen Generation, Susanta K. Das and Kranthi K. Gadde
Modeling Studies of Tubular SOFCs for Transportation Markets, Gianfranco DiGiuseppe, Naveen K. Honnagondanahalli, Owen Taylor, and Jeff Dederer
On the Use of a Windshield Wiper Mechanism Simulation Project to Enhance Student Understanding of Design Topics, Yaomin Dong, Arnaldo J. Mazzei Jr., and Raghu Echempati
Asymmetric Wicking and Reduced Evaporation Time of Droplets Penetrating a Thin Double-layered Porous Material, Amir D. Gat, Aria Vahdani, Homayun K. Navaz, and Morteza Gharib
Resonances of Compact Tapered Inhomogeneous Axially Loaded Shafts, Arnaldo J. Mazzei Jr. and Richard A. Scott
Experimental and Analytical Study of the Transient Process of Infiltration/Exfiltration in Walk-in Coolers, Homayun K. Navaz, Kristina Kamensky, Anthony Dang, Mazyar Amin, and Ramin Faramarzi
Standards and Student Projects: Polymers Properties Course Work Increases Understanding of ASTM Standards, Laura L. Sullivan
Design, Modeling and Development of a Serial Hybrid Motorcycle with HCCI Engine, Yuh-Yih Wu, Chen Duan, Kai-Xian Hong, Hsien-Chi Tsai, and Craig Hoff
Submissions from 2012
Effects of Secondary Variables on Infiltration Rate of Open Refrigerated Vertical Display Cases with Single-band Air Curtain, Mazyar Amin, Dana Dabiri, and Homayun K. Navaz
A Modified Intramedullary Nail Interlocking Design Yields Improved Stability for Fatigue Cycling in a Canine Femur Fracture Model, Patrick Atkinson, Adam N. Garlock, Jim Donovan, David J. LeCronier, John Houghtaling, and Stephen Burton
Development of an Interlocked Nail for Segmental Defects in the Rabbit Tibia, Patrick Atkinson, David J. LeCronier, John S. Papakonstantinou, Vineetha Gheevarughese, Casey D. Beran, and Norman E. Walter
Bringing Environmental Sustainability to Undergraduate Engineering Education: Experiences in an Inter-Disciplinary Course, Jennifer Aurandt, Terri Lynch-Caris, Andrew S. Borchers, Jacqueline El-Sayed, and Craig Hoff
Computational Consideration of Crush Energy Estimation in Frontal Collisions with Underride and Lateral Offset, Chris Cummins and Massoud Tavakoli
Legacy Vehicle Fuel System Testing with Intermediate Ethanol Blends, Gregory W. Davis, Craig Hoff, Zackery Borton, and Matthew A. Ratcliff
Seal Leakage Effects on the Electrical Performance of an SOFC Button Cell, Gianfranco DiGiuseppe
Surface-to-Surface Radiation Exchange Effects in a 3D SOFC Stack Unit Cell, Gianfranco DiGiuseppe
On the Identification of Impedance Spectroscopy Processes of an SOFC Under Different Hydrogen Concentrations, Gianfranco DiGiuseppe and Li Sun
Integrated Metal Forming and Vibration Analysis of Sheet Metal Parts, Raghu Echempati and Andrew O. Fox
Wicking of a Liquid Bridge Connected to a Moving Porous Surface, Amir D. Gat, Homayun K. Navaz, and Morteza Gharib
Long-Term Outcomes in Fibromyalgia Patients Treated with Cortical Electrostimulation, Jeffrey Hargrove, Robert M. Bennett, and Daniel J. Clauw
A Randomized Placebo Controlled Study of Noninvasive Cortical Electrostimulation in the Treatment of Fibromyalgia Patients, Jeffrey Hargrove, Robert M. Bennett, David G. Simons, Susan J. Smith, Sunil Nagpal, and Donald E. Deering
Capillary Force Driven Primary and Secondary Unidirectional Flow of Wetting Liquid into Porous Medium, B. Markicevic, K. Hoff, H. Li, Ali R. Zand, and Homayun K. Navaz
Numerical Modeling of One-Dimensional Wave Propagation in Non-Homogeneous Materials, Arnaldo J. Mazzei Jr. and Richard A. Scott
On the effects of non-homogeneous materials on the vibrations and static stability of tapered shafts, Arnaldo J. Mazzei Jr. and Richard A. Scott
Submissions from 2011
Comprehensive Study on the Effects of Fluid Dynamics of Air Curtain and Geometry, on Infiltration Rate of Open Refrigerated Cavities, Mazyar Amin, Dana Dabiri, and Homayun K. Navaz
Design and Assessment of a Wrapped Cylindrical Ca‐P AZ31 Mg Alloy for Critical‐Size Ulna Defect Repair, Patrick Atkinson, Montserrat Rabago Smith, Desiree White, Tyler Piersma, Gloria Gutierrez, Gianny Rossini, Sapna Desai, Stephen Wellinghoff, Hui Yu, and Xingguo Cheng
Capillary Climb Dynamics in the Limits of Prevailing Capillary and Gravity Force, B. Bijeljic, B. Markicevic, and Homayun K. Navaz
Investigation of Rear Occupant Head Restraint Interaction in High-Severity Rear Impact using BioRID and HIII, Jeffrey Braganza, Massoud S. Tavakoli, and Janet Brelin-Fornari
Side Effects: Kettering University research shows that side impact testing on a deceleration sled is repeatable and cost-effective, Janet Brelin-Fornari
A Two-dimensional Modeling Study of a Planar SOFC using Actual Cell Testing Geometry and Operating Conditions, Gianfranco DiGiuseppe, Yeshwanth J. Gowda, and Naveen K. Honnagondanahalli
Electrochemical Performance of a Solid Oxide Fuel Cell with an LSCF Cathode under Different Oxygen Concentrations, Gianfranco DiGiuseppe and Li Sun
Virtual Forming and Gage Thickness Optimization of Sheet Metal Components, Raghu Echempati, Kwintiana Bernadetta Ane, and Dieter Roller
Evaluating Impact Attenuator Performance for a Formula SAE Vehicle, Jason Fahland, Craig Hoff, and Janet Brelin-Fornari
Dynamics of Freely Moving Plates Connected by a Shallow Liquid Bridge, Amir Gat, Homayun K. Navaz, and Morteza Gharib
Long-Term Outcomes in Fibromyalgia Patients Treated with Cortical Electrostimulation, Jeffrey Hargrove, Robert M. Bennett, and Daniel J. Clauw
Simple and Effective Method to Measure the Diffusion Coefficient of Organic Vapors in Porous Media, Hongyang Li, Ali R. Zand, Yuri Sikorski, Bojan Markicevic, Jennifer Meyers, Carlos Rincon, Elizabeth Bowden, Travis Bethel, Matthew S. Sanders, Homayun K. Navaz, and Montserrat Rabago-Smith
Dynamics and Stability of Two-potential Flows in the Porous Media, Bojan Markicevic, Branko Bijeljic, and Homayun K. Navaz
Influence of the Boundary Conditions on Capillary Flow Dynamics and Liquid Distribution in a Porous Medium, Bojan Markicevic, Hongyang Li, Ali R. Zand, and Homayun K. Navaz
On the Effect of Functionally Graded Materials on Resonances of Rotating Beams, Arnaldo J. Mazzei Jr.
Effect of Functionally Graded Materials on Resonances of Bending Shafts Under Time-Dependent Axial Loading, Arnaldo J. Mazzei Jr. and Richard A. Scott
Effect of functionally graded materials on resonances of rotating beams, Arnaldo J. Mazzei Jr. and Richard A. Scott
Transverse vibrations of tapered materially inhomogeneous axially loaded shafts, Arnaldo J. Mazzei Jr. and Richard A. Scott
Parameterizing Potential Exposure to Sulfur Mustard (HD) Using Mixed Model Regression, James L. Regens, James T. Gunter, Mazyar Amin, Albert Nowakowski, and Homayun Navaz
Submissions from 2010
Evaluation of Transdermal Steroids for Trapeziometacarpal Arthritis, Patrick Atkinson, Rajeev Jain, Elizabeth Jain, A. George Dass, Otto Wickstrom, and Norman Walter
Streptococcus bovis Infection of Total Hip Arthroplasty in Association With Carcinoma of Colon, Patrick Atkinson, Ajay Srivastava, and Norman Walter
The Influence of Occupant Anthropometry and Seat Position on Ejection Risk in a Rollover, Theresa Atkinson, Andrew Fras, and Paul Telehowski
Synthesis and Performance Evaluation of a Polymer Mesh Supported Proton Exchange Membrane for Fuel Cell Applications, Susanta K. Das, Kingsley Joel Berry, Hedrick Jamie, Lars G. Beholz, and Ali R. Zand
Quantitative Electroencephalographic Abnormalities in Fibromyalgia Patients, Jeffrey Hargrove, R M. Bennett, D. G. Simons, S. J. Smith, S. Nagpal, and D. E. Deering
Trailer Rear Impact Protection: Influence of Guard Support Deformation, Ramakrishnan Iyer and Massoud Tavakoli
Quantifying R2 bias in the presence of measurement error, Karl D. Majeske, Terri Lynch-Caris, and Janet Brelin-Fornari
On Spread Extent of Sessile Droplet into Porous Medium: Numerical Solution and Comparisons with Experiments, B. Markicevic, T. G. D'Onofrio, and Homayun K. Navaz
The Influence of Capillary Flow on the Fate of Evaporating Wetted Imprint of the Sessile Droplet in Porous Medium, B. Markicevic and Homayun K. Navaz
Primary and Secondary Infiltration of Wetting Liquid Sessile Droplet into Porous Medium, Bojan Markicevic and Homayun K. Navaz
Passage through resonance in a universal joint driveline system, Arnaldo J. Mazzei Jr.
Submissions from 2009
Experimental Investiagtion of the Effect of Various Parameters on the Infiltration Rates of Single Band Open Vertical Refrigerated Display Cases with Zero Back Panel Flow, Mazyar Amin, Dana Dibiri, and Homayun K. Navaz
High-Speed Cameras Assist in Crash Sled Testing, Janet Brelin-Fornari and Andrew Bridges
Effect of Head and Neck Anthropometry on the Normal Range of Motion of the Cervical Spine of Prepubescent Children, Janet Brelin-Fornari, Karl D. Majeske, and Terri Lynch-Caris
Experimental Evaluation of CO Poisoning on the Performance of a High Temperature Proton Exchange Membrane Fuel Cell, Susanta K. Das, Kingsley Joel Berry, and Antonio M. Reis
Semi-Empirical Equations to Estimate SOFC Lifetime, Gianfranco DiGiuseppe and Li Sun
Experimental and Numerical Study of Spread and Sorption of VX Sessile Droplets into Medium Grain-Size Sand, Terrence G. D'Onofrio, Homayun K. Navaz, Bojan Markicevic, Brent A. Mantooth, and Kenneth B. Sumpter
Integration of Mechanism and Finite Element Analyses Concepts Using Advanced CAE Tools, Raghu Echempati and Andrew O. Fox
Modeling, Forming, Modal Analysis, and Gauge Optimization of Sheet Metal Parts, Andrew O. Fox and Raghu Echempati
Respiratory Measurement Utilizing a Novel Laser Displacement Technique: Normal Tidal Breathing, Jeffrey Hargrove, Eric D. Zemper, and Mary L. Jannausch
Infiltration Time and Imprint Shape of a Sessile Droplet Imbibing Porous Medium, B. Markicevic, H. Li, Y. Sikorski, Ali R. Zand, M. Sanders, and Homayun K. Navaz
Numerical Solution of Wetting Fluid Spread into Porous Media, Bojan Markicevic and Homayun K. Navaz
Lessons Learned from Teaching and Assessment in the Physics for Engineers Course Sequence, Anca L. Sala and Raghu Echempati
Casting Technique and Restraint Choice Influence Child Safety During Transport of Body Casted Children Subjected to a Simulated Frontal MVA, Julie Zielinski, Glen Oliver, Justin Sybesma, Norman Walter, and Patrick Atkinson
Submissions from 2008
Tracer Gas Technique: A New Approach for Steady State Infiltration Rate Measurement of Open Refrigerated Display Cases, Mazyar Amin, Dana Dabiri, and Homayun K. Navaz
A Systematic Approach for Solving Large-scale Problems by Neural Network: Open Refrigerated Display Cases and Droplet Evaporation Problems, Mazyar Amin, Homayun K. Navaz, Nasser Kehtarnavaz, and Dana Dabiri
Air Curtains of Open Refrigerated Display Cases Revisited: A New Technique for Infiltration Rate Measurements, M. Amin, Homayun K. Navaz, D. Dabiri, and Ramin T. Faramarzi
Association of Knee Bone Bruise Frequency with Time Post Injury and Type of Soft Tissue Injury, Patrick Atkinson, T. G. Cooper, S. Anseth, N. E. Walter, R. Kargus, and R. C. Haut
Alteration of the Amount and Morphology of Wear Particles by the Addition of Loading Profile Transitions During Artificial Hip Wear Testing, Patrick Atkinson, J.P. Shorez, T.S. Harding, and N. Walter
High Power Density Solid Oxide Fuel Cells for Auxiliary Power Unit Applications, Robert Draper and Gianfranco DiGiuseppe
Effective integration of mathematical and CAE tools in engineering, Raghu Echempati, Enayat Mahajerin, and Anca L. Sala
Establishing reference values for cervical spine range of motion in pre-pubescent children, Terri Lynch-Caris, Karl D. Majeske, Janet Brelin-Fornari, and Shrishail Nashi
Impact Assessment of Problem-based Learning in an Engineering Science Course, Karim J. Nasr and Bassem Ramadan
Convective Evaporation Model of Sessible Droplets in a Turbulent Flow - Comparison with Wind Tunnel Data, Homayun K. Navaz, Ewen Chan, and Bojan Markicevic
Sessile Droplet Spread into Porous Substrates - Determination of Capillary Pressure using a Continuum Approach, Homayun K. Navaz, Bojan Markicevic, Ali R. Zand, Yuri Sikorski, Ewen Chan, Matthew Sanders, and Terrence G. D'Onofrio
Influence of Restraints on Body-Casted Child ATDs in Front and Side Sled Tests, G. Oliver II, J. Zielenski, Janet Brelin-Fornari, and Patrick J. Atkinson
Direct Assessment of Student Learning Outcomes in Physics for Engineers Courses, Anca L. Sala and Raghu Echempati
Alteration of the Amount and Morphology of Wear Particles by the Addition of Loading Profile Transitions During Artificial Hip Wear Testing, J. P. Shorez, T. S. Harding, Patrick J. Atkinson, and N. Walter
Characteristics of Trailer Rear Impact Guard - Interdependence of Guard Strength, Energy Absorption, Occupant Acceleration Forces and Passenger Compartment Intrusion, Massoud Tavakoli and Vijay A. M. George
Submissions from 2007
Orthogonal Linear Regression in Roentgen Stereophotogrammetry, Patrick Atkinson, Jesse V. Benny, and Brian J. McCartin
